With the addition of `browser.targets()` api, we now can connect to
in-flight targets.
For Puppeteer, it means that it can "miss" certain events happenning
while it wasn't attached to the target.
This patch:
- fixes this problem with NetworkManager, preparing it for the
missed `requestWillBeSent` event.
- adds a new test to ensure that not a single unhandled promise
rejection has happened during test execution.
Fixes#1363.
Currently, the NavigatorWatcher ensures that all the frames in the
frame subtree reach the desired lifecycle events state.
For this to be fully correct, NavigatorWatcher should also check
navigation status whenever frames are detached.
In Blink, frames don't necesserily have execution context all the time.
DevTools Protocol precisely reports this situation, which results in
Puppeteer's frame.executionContext() being null occasionally.
However, from puppeteer point of view every frame will have at least a
default executions context, sooner or later:
- frame's execution context might be created naturally to run frame's
javascript
- if frame has no javascript, devtools protocol will issue execution
context creation
This patch builds up on this assumption and makes frame.executionContext()
to be a promise.
As a result, all the evaluations await for the execution context to be created first.
Fixes#827, #1325
BREAKING CHANGE: this patch changes frame.executionContext() method to return a promise.
To migrate onto a new behavior, await the context first before using it.
The SIGHUP signal is sent whenever the controlling terminal is closed.
On Windows, SIGHUP is emulated by libuv, and will be the only signal we
receive before the application will be terminated.
This patch starts handling SIGHUP in the same way we handle SIGTERM.
Fixes#1367.
SIGTERM signal is widely used to notify application that it will be shut down.
This patch starts listening to SIGTERM event to gracefully retire
chromium instance.
References #1047.
Currently, `elementHandle.screenshot` passes bounding box into the `page.captureScreenshot`
method.
This is wrong since `captureScreenshot` accepts viewport, not bounding box.
This patch uses layout metrics to convert bounding box into viewport.
Fixes#1315.
Currently, we wait only for the main frame to reach the desired
lifecycle state.
This patch starts waiting until all the frames reach the desired
lifecycle state.
Fixes#1173.
This patch:
- starts persisting lifecycle state for every frame
- migrates NavigationWatcher to rely on these lifecycle events
- refactors Page.goto to properly return navigation errors
Fixes#1218.
This patch starts asserting that all values are of type "string".
The alternative approach to cast values to strings
might yield a hard-to-debug errors.
Fixes#1276.
This roll brings in a bunch of important patches:
- crrev.com/512647 Changed headless browser profile dir to use Default profile path
- crrev.com/512760 DevTools: stop idleness detector when pending navigation commits
- crrev.com/512905 DevTools: introduce Page.getFrameTree
- crrev.com/513373 DevTools: report loaderId in the lifecycle events
- crrev.com/513419 DevTools: introduce Page.setLifecycleEventsEnabled
- crrev.com/513422 DevTools: return loaderId from Page.navigate
Fixes#921
BREAKING CHANGE:
Headless user profile structure is changing. Custom profiles set with --user-data-dir flag will no longer be read in Chrome 63 and will have to be recreated.
Alternatively, you can migrate old headless profile to a new structure. if you stored your profile in `<profile>` folder, you would run the following bash commands:
```bash
cd <profile>
mkdir Default
mv * Default
```
Full headless-dev PSA announcement: https://groups.google.com/a/chromium.org/forum/#!msg/headless-dev/asX8WgktXIE/zTUfmHDcAQAJ
This patch adds `Frame.select` method that does the same functionality as
former `Page.select`, but on a per-frame level.
The `Page.select` method becomes a shortcut for the ÷main frame's select.
Fixes#1139
This patch migrates puppeteer to support PlzNavigate chromium
project.
As a consequence of this patch, we no longer wait for both
requestWillBeSent and requestIntercepted events to happen. This should
resolve a ton of request interception bugs that "hanged" the loading.
Fixes#877.
Currently, NavigationWatcher listens to lifecycle events from Page
domain and security events from Security domain.
However, the events are dispatched from different processes in browser:
- Page's lifecycle events are dispatched from renderer process
- Security events are dispatched from browser process
This makes for the undefined order between events and results in
NavigationWatcher reporting different failuer messages, based on
the event order.
This patch stops relying on security errors in navigation watcher and
instead switches to request failure codes for the main resource.
Fixes#1195
Elements in shadow dom erroneously considered that they were detached
from document.
This patch starts using `Element.isConnected` instead of
`document.contains()` call.
Fixes#1061.
This roll includes:
- crrev.com/510651 that changes request interception methods in protocol
- s/Page.setRequestInterceptionEnabled/Page.setRequestInterception
BREAKING CHANGE
Page.setRequestInterceptionEnabled is renamed into
Page.setRequestInterception.
This patch adds "options" parameter to the `page.setContent` method. The
parameter is the same as a navigation parameter and allows to specify
maximum timeout to wait for resources to be loaded, as well as to
describe events that should be emitted before the setContent operation
would be considered successful.
Fixes#728.
This patch adds support to multiple events that could be passed inside
navigation methods:
- Page.goto
- Page.waitForNavigation
- Page.goForward
- Page.goBack
- Page.reload
Fixes#805
This patch adds a new `domcontentloaded` option to a bunch of navigation
methods:
- Page.goto
- Page.waitForNavigation
- Page.goBack
- Page.goForward
- Page.reload
Fixes#946.
This patch:
- migrates navigation watcher to use protocol-issued lifecycle events.
- removes `networkIdleTimeout` and `networkIdleInflight` options for
`page.goto` method
- adds a new `networkidle0` value to the waitUntil option of navigation
methods
References #728.
BREAKING CHANGE:
As an implication of this new approach, the `networkIdleTimeout` and
`networkIdleInflight` options are no longer supported. Interested
clients should implement the behavior themselves using the `request` and
`response` events.
BREAKING CHANGE:
This patch lets key names be code in addition to key. When specifying a code, the proper text is generated assuming a standard US keyboard layout. e.g Digit5 -> "5" or "%" depending on Shift.
* location is now specified. #777
* Using unknown key names now throws an error. #723
* Typing newlines now correctly presses enter. #681
feat(interception): Implement request.respond method
This patch implements a new Request.respond method. This
allows users to fulfill the intercepted request with a hand-crafted
response if they wish so.
References #1020.
Currently, JSHandle.jsonValue() is implemented as in-page JSON.stringify
call and consequent JSON.parse in node. This approach proved to be
unfortunate for automation purposes: if page author overrode the
Object.prototype.toJSON method, then it's harder for puppeteer to
interact with the page.
This patch switches JSHandle.jsonValue to use protocol serialization
that ignores toJSON property. THis also changes the `page.evaluate`
behavior since it is based on JSHandle.jsonValue().
Fixes#1003.
BREAKING CHANGE:
`page.evaluate` no longer calls toJSON when generating return value.
For the old behavior, do JSON.parse/JSON.stringify manually:
```js
const json = JSON.parse(await page.evaluate(() => JSON.stringify(obj)));
```
This patch:
- introduces Target class that represents any inspectable target, such as service worker or page
- emits events when targets come and go
- introduces target.page() to instantiate a page from a target
Fixes#386, fixes#443.
Similarly to the `request.response()` method, this patch adds
`request.failure()` method that returns error details for the failed
requests.
Fixes#901.
This patch:
- changes `browser.close` to terminate browser.
- introduces new `browser.disconnect` to disconnect from a browser without closing it
This patch: fixes#918, fixes#989
BREAKING CHANGE:
`browser.close()` will always close a browser, even if it was initialized with
`puppeteer.connect`. To disconnect from a remote browser, use `browser.disconnect()` instead.
This patch starts generating input events for `keyboard.down`, addressing bullet 2 of
#723. With this patch, there's no longer any difference between `keboard.press('a')` and
`keyboard.press('a', {text: 'a'})`.
BREAKING CHANGE:
`keyboard.down('a')` starts generating input event (wasn't the case before).
References #723
