Previously, if timeout is falsy, the targets would only
be checked if a browser-level event fires which lead to
a race: if the events arrived before waiting for a target,
the promise would never resolve.
Fixes#8763
This PR implements automatic detection of the Firefox product when the `.connect()` method is used. This partially undoes the breaking change in https://github.com/puppeteer/puppeteer/pull/8520 but it's also a breaking change on its own since we don't accept an explicit product name anymore (it does not look like it was used anyway).
When we attach to a frame, we send a call to get
the page frame tree from CDP. Based on the tree data
we look up the parent frame if parentId is provided.
The problem is that the call to get the page frame
tree could take arbitrary time and the calls for the
parent and child frames might happen at the same time.
So the situation where the frame tree for the child frame
is resolved before the parent frame is known is fairly
common.
This PR addresses the issue by awaiting for the parent
frame id before attempting to register a child frame.
* feat: use CDP's auto-attach mechanism
In this PR, we refactor Puppeteer to make use of the CDP's auto-attach mechanism. This allows the backend to pause
new targets and give Puppeteer a chance to configure them properly. This fixes the flakiness related to dealing with
OOPIFs and should fix some other issues related to the network interception and navigations. If those are not fixed completely by this PR, the PR serves a solid base for fixing them.
Closes https://github.com/puppeteer/puppeteer/issues/8507, https://github.com/puppeteer/puppeteer/issues/7990
Unlocks https://github.com/puppeteer/puppeteer/issues/3667
BREAKING CHANGE: With Chromium, Puppeteer will now attach to page/iframe targets immediately to allow reliable configuration of targets.
This patch fixes page.#scrollIntoViewIfNeeded, so that it works with devtools protocol.
Now it blocks the main thread and waits until the scrolling action finishes in Chrome.
Fallbacks to the old implementation if `DOM.scrollIntoViewIfNeeded` is not supported for Firefox.
Issues: #8627, #1805
This PR greatly improves the types within Puppeteer:
- **Almost everything** is auto-deduced.
- Parameters don't need to be specified in the function. They are deduced from the spread.
- Return types don't need to be specified. They are deduced from the function. (More on this below)
- Selections based on tag names correctly deduce element type, similar to TypeScript's mechanism for `getElementByTagName`.
- [**BREAKING CHANGE**] We've removed the ability to declare return types in type arguments for the following reasons:
1. Setting them will indubitably break auto-deduction.
2. You can just use `as ...` in TypeScript to coerce the correct type (given it makes sense).
- [**BREAKING CHANGE**] `waitFor` is officially gone.
To migrate to these changes, there are only four things you may need to change:
- If you set a return type using the `ReturnType` type parameter, remove it and use `as ...` and `HandleFor` (if necessary).
⛔ `evaluate<ReturnType>(a: number, b: number) => {...}, a, b)`
✅ `(await evaluate(a, b) => {...}, a, b)) as ReturnType`
⛔ `evaluateHandle<ReturnType>(a: number, b: number) => {...}, a, b)`
✅ `(await evaluateHandle(a, b) => {...}, a, b)) as HandleFor<ReturnType>`
- If you set any type parameters in the *parameters* of an evaluation function, remove them.
⛔ `evaluate(a: number, b: number) => {...}, a, b)`
✅ `evaluate(a, b) => {...}, a, b)`
- If you set any type parameters in the method's declaration, remove them.
⛔ `evaluate<(a: number, b: number) => void>((a, b) => {...}, a, b)`
✅ `evaluate(a, b) => {...}, a, b)`
* The testing tsconfig.json inherits from the base TS config.
* A lot of type assertions have been inserted...a lot.
* All testing utilities have migrated to TS.
* text-diff is being replaced with diff for TS compatibility.
* ProtocolError has been added to PuppeteerErrors and PuppeteerErrors is no longer a record (it's been frozen).
* Fixes a small bug where null was an allowable media type in emulation (should be undefined).
* fix: If currentNode and root are the same, do not include them in the result
* fix: Tests that only child element is included in the result
Co-authored-by: jrandolf <101637635+jrandolf@users.noreply.github.com>
* fix: test failing in headful
* fix: install Firefox for headful tests
* fix: skip favicon.ico requests in test
* fix: auth test in headful
* fix: disable NetworkTimeServiceQuerying
* fix: filter more favicon requests
* fix: network test with favicon
* fix: improve fixes
Without this patch, two tests ignore the BINARY envvar, and fail when not using
the embedded chromium, unless the chromium executable path is defined via
PUPPETEER_EXECUTABLE_PATH, which should not be considered according to the
docs.
* fix: ensure dom binding is not called after detatch
Fixes#7814
* refactor: detach listeners instead
* refactor: safer approach
* fix: test in test/page.spec.ts
Co-authored-by: Alex Rudenko <OrKoN@users.noreply.github.com>
Some recent changes to allow arm64 environments (including M1 macs) to
launch a chromium installation successfully before arm-compatible builds
were downloadable prevented the usage of PUPPETEER_EXECUTABLE_PATH in
some environments. Currently, when the platform is not darwin and the
arch is arm64, an executable cannot be specified using the environment
variable.
Generally speaking, environment variables have highest precedence for
options such as this since they depend on system configuration.
These change:
1. allow the ENV variable to always be used when defined and not
specified in LaunchOptions (and when not puppeteer-core)
2. Retain the existing behavior of assuming /usr/bin/chromium-browser on
platforms like Ubuntu (exact if-conditions preserved to avoid any
breaking changes)
3. Add some tests for this particular portion of the code.
The doc for boundingBox says that it should return the boundingBox
relative to the main frame, therefore, this fix would make the
actual implementation correspond to the documentation. boxModel
documentation does not have this note but I think it'd make sense
to have it match the behaviour of the boundingBox API.
So it appears that all bindings are added to the secondary world and all
evaluations are also running there. ElementHandle.evaluate is returning
handles from the main world though. Therefore, we need to be careful
and adopt handles to the right context before doing waitForSelector
So it appears that all bindings are added to the secondary world and all
evaluations are also running there. ElementHandle.evaluate is returning
handles from the main world though. Therefore, we need to be careful
and adopt handles to the right context before doing waitForSelector.
When using a custom Firefox profile for Puppeteer the modified
preferences as present in prefs.js need to be reset once the
profile is no longer needed by Puppeteer. If not done this could
cause side-effects when the profile is used next time outside
of Puppeteer.
As ride-along fix the "--foreground" argument for Firefox will
only be used on MacOS because that's the only supported platform.
This updates the regular expression used to parse aria attribute
selectors so that single quotes may be used as an alternative to double
quotes, e.g. `aria/Single button[role='button']`.
Issues: #7721
Co-authored-by: Andy Earnshaw <andy.earnshaw@gmail.com>
This pull request to adds better support for OOP iframes (see #2548)
The current problem with OOP iframes is that they are moved to a different target. Because of this, the previous versions of Puppeteer pretty much ignored them.
This change extends the FrameManager to already take OOP iframes into account and hides the fact that those frames are actually in different targets.
Further work needs to be done to also make the NetworkManager aware of these and to make sure that settings like emulations etc. are also properly passed down to the new targets.
In some situations, Puppeteer is left in an invalid state because protocol errors that could have been handled by the user where just hidden from them. This patch removes some of these cases and also makes sure that unhandled promise rejections lead to a test failure in mocha.
Enable developers to handle 'Invalid header' errors instead of hiding them to make sure they can address them properly.
Co-authored-by: Jan Scheffler <janscheffler@chromium.org>
Sometimes an element has not been layed out yet and, in this case,
clickablePoint fails because backend cannot compute content quads.
Co-authored-by: Jan Scheffler <janscheffler@chromium.org>
Puppeteer already allows creating a new CDP session
via target.createCDPSession but there is no way
to get access to any existing session to send
some additional commands.
Until now, the click would be always sent to the middle
point of the target element. With this change, one can define
offsets relative to the border box of the elements and click
different areas of an element.
Up to now, only strings starting with '//' are considered as to XPath selectors. Unfortunately, this is too restricting. This fix allows valid XPath selectors starting with: '/', './', and even '(//*[1])'
This change adds a new `channel` parameter to `puppeteer.launch`. When specified, Puppeteer will search for the locally installed release channel of Google Chrome and use it to launch. Available values are `chrome`, `chrome-beta`, `chrome-canary`, `chrome-dev`. This parameter is mutually exclusive with `executablePath`.
With this change,`request.respond`, `request.abort`, and `request.continue` can accept an optional `priority` to activate Cooperative Intercept Mode. In Cooperative Mode, all intercept handlers are guaranteed to run and all async handlers are awaited. The interception is resolved to the highest-priority resolution. See _Cooperative Intercept Mode and Legacy Intercept Mode_ in `docs/api.md` for details.
This commit adds drag-and-drop support, leveraging new additions to the CDP Input domain (Input.setInterceptDrags, Input.dispatchDragEvent, and Input.dragIntercepted).
Just some code reorder. We had a describe between it calls. I'm moving that describe to the end
Co-authored-by: Jack Franklin <jacktfranklin@chromium.org>
* chore: enforce pinned dependencies
Because we don't check our `package-lock.json` in, we can end up with
different versions installed locally vs CI, or even two devs having
different versions. Let's pin and enforce we pin every version to
avoid this.
This PR updates some code to remove constant ESLint warnings. It also
upgrades those warnings to errors - so that they have to be resolved
as part of the PR, rather than landing as a warning and causing noise.
Fixes#7229.
We're seeing odd failures with Prettier on some CI branches; my hunch is that they are installing different versions of the package and therefore getting formatting conflicts. This PR updates them all and pins them to specific versions - something we should probably consider generally, or remove our `package-lock.json` from the gitignore.
The existing behavior is expected to be unchanged as the value defaults to true.
Adding such option would allow user to skip the initial wait.
Issue: #3630
* fix: make `$` and `$$` selectors generic
This means, much like TS's in built `querySelector` type, you can now do:
```ts
const listItems = page.$$<HTMLLIElement>('ul li');
```
And/or:
```ts
const h2 = page.$<HTMLHeadingElement>('h2');
```
And the return value will be of type `ElementHandle<T>|null`, where `T`
is the type you provided. By default `T` is an `Element`, so you don't
have to provide this if you don't care as a consumer about the exact
type you get back.
* chore: fix test assertions
* feat(chromium): roll Chromium to r856583
This corresponds to Chromium 90.0.4427.0
This roll includes:
- Add sourceScheme, sourcePort, and sameParty to DevTools backend (https://crbug.com/1170548, https://crbug.com/1142606)
We were blocked on doing this because API Extractor didn't support it,
but now it does, so we can bump TS and the API tooling in one go. None
of the breaking changes in TS4 cause us any issues.
During the migration to TS we changed `jsonValue` so it returned
`<Record<string, unknown>>`. This is only true if all the JSON values it
returns are objects; but it could return an array, a string, a number,
etc. Therefore we make the type generic, setting the default to
`unknown`, so the user has control over the type.
This corresponds to Chromium 90.0.4403.0
This roll includes:
- Cut screenshot by ViewPort size, not position (crrev.com/c/2643792)
BREAKING CHANGE:
- `page.screenshot` cuts screenshot content by the ViewPort size, not ViewPort position.
This corresponds to Chromium 89.0.4389.0.
This roll includes:
- Add `SameParty` attribute to cookies
https://crrev.com/c/2598846
- Anchor `target=_blank` implies `rel=noopener`
https://crrev.com/c/1630010
- Don’t expect ignored elements in the AXTree
https://crrev.com/c/2505362
BREAKING CHANGE: The built-in `aria/` selector query handler doesn’t return ignored elements anymore.
Issue: #6758
This patch enables more tests for Firefox. These tests are enabled in Mozilla's CI for Firefox. The extra error handling here prevents hangs in the test harness in that environment.
The `Puppeteer` class had two concerns:
* connect to an existing browser
* launch a new browser
The first of those concerns is needed in all environments, but the
second is only needed in Node.
https://github.com/puppeteer/puppeteer/pull/6484 landing enabled us to
pull the `Puppeteer` class apart into two:
1. `Puppeteer` which hosts the behaviour for connecting to existing
browsers.
2. `PuppeteerNode`, which extends `Puppeteer` and also adds the ability
to launch a new browser.
This is a non-breaking change, because Node users will still get an
instance of a class with all the methods they expect, but it'll be a
`PuppeteerNode` rather than `Puppeteer`. I don't expect this to cause
people any issues.
We also now have new files that are effectively the entry points for
Puppeteer:
* `node.ts`: the main entry point for Puppeteer on Node.
* `web.ts`: the main entry point for Puppeteer on the web.
* `node-puppeteer-core.ts`: for those using puppeteer-core (which only
exists in Node, not on the web).
Launching headless with a relative `userDataDir` hangs on Windows. Fix by calling `path.resolve` (idempotent) to add an absolute path instead in `defaultArgs`.
Issues: #3453
The `Launcher` class was serving two purposes:
1. Launch browsers
2. Connect to browsers
Number 1) only needs to be done in Node land, but 2) is agnostic; in a
browser version of Puppeteer we'll need the ability to connect over a
websocket to send commands back and forth.
As part of the agnostification work we needed to split the `Launcher` up
so that the connection part can be made agnostic. Additionally, I
removed dependencies on `https`, `http` and `URL` from Node, instead
leaning on fetch (via `node-fetch` if in Node land) and the browser
`URL` API (which was added to Node in Node 10).
This commit adds a new built-in handler for querying by accessible name and role (#6307).
Support for waitForSelector will be added in a follow-up commit.
In `src/common` we now use `fs.promises.X` which we can dynamically
`import`. In a browser environment this code will never run because it's
gated on `isNode` (in a future PR we will add tree-shaking to the bundle
step such that this code is eliminated). By using `import`, we ensure
TypeScript still can track types and give good type information.
In `src/node` we continue to use `util.promisify` but that's not a
concern as that code explicitly is never run in the browser.
This commit changes the internal representation of query handlers to contain Puppeteer-level code instead of page functions.
The interface `CustomQueryHandler` is introduced for user-defined query handlers. When a `CustomQueryHandler` is registered using `registerCustomQueryHandler` a corresponding Puppeteer-level handler is created through `makeQueryHandler` by wrapping the page functions as appropriate.
The internal query handlers (defined by the interface `QueryHandler`) contain two new functions: `waitFor` and `queryAllArray`.
- `waitFor` allows page-based handlers to make use of the `WaitTask`-backed implementation in `DOMWorld`, whereas purely Puppeteer-based handlers can define an alternative approach instead.
- `queryAllArray` is similar to `queryAll` but with a slightly different interface; it returns a `JSHandle` to an array with the results as opposed to an array of `ElementHandle`. It is used by `$$eval`.
After this change, we can introduce built-in query handlers that are not executed in the page context (#6307).
The logic for waitForXPath and waitForSelector is currently very tightly coupled. This commit tries to untangle that relationship. This is the first step towards introducing built-in query handlers that are not executed in the page context (#6307).
